Teflon Coatings for Machine Shops Council Bluffs
Machine shops in Council Bluffs and their customers have found many uses for parts coated with Teflon® or other fluoropolymers. These coatings are useful for many reasons, including nonstick and nonwetting, heat and chemical and corrosion resistance, unique electrical characteristics, as well as a low coefficient of friction too. Coating Solutions will coat one part or a thousand parts with Teflon® or another fluoropolymer for your machine shop in Council Bluffs. Any parts you need or your customers have requested to have coated, we will get the job done. And our fast turnaround means that you can get the parts delivered to your customers in a timely manner. Furthermore, because we have the lowest minimum lot charge in the industry, our coatings are cost-effective for everybody involved. So get a hold of us today for any high quality and low cost Teflon® coatings you have the need for.
Superior Release Coatings for Council Bluffs
If your customer has asked that a part be coated in order for it to have superior release, we will take care of it for you. No matter if you are fabricating parts for a food processor, a packaging customer, or anyone else, we will coat any items they need for fantastic nonstick abilities. And if you need anything coated for your own Council Bluffs machine shop, we can obviously handle that too.
Nonwetting Coatings for Machine Shops Council Bluffs
Fluoropolymer coatings have tremendous nonwetting assets. If you have a customer who has the need for a part coated for nonwetting abilities, simply inform us of how it is going to be used and we will determine which coating will be best for the substrate.
Temperature Stability of Fluoropolymers
Teflon® and other fluoropolymer coatings are also held in high esteem for their resistance to extreme temperatures. This capability is what has made them to often be found in bakeware, as it doesn’t do a whole lot of good to have a pan coated with nonstick Teflon® only to have it burn off with the first fried pork cutlet. Many industries have used fluoropolymers because of the temperature resistance capabilities, including many industries that machine shops in Council Bluffs often work with. If you have a customer who is requesting to have a part coated with a fluoropolymer so that it can resist temperatures, we can figure out which coating will work best upon finding out what temperatures the substrate will need to endure. Furthermore, some machine shops need fluoropolymer coatings for their own parts as well. If you need a part coated for your own shop, just give us a shout today.
Low Friction Coatings for Machine Shops in Council Bluffs
An extremely low coefficient of friction is another common benefit to having parts coated with Teflon® and other fluoropolymers. These coatings significantly reduce the amount of friction between moving parts and many customers of machine shops need their parts to have this capability. When your customers ask to have a part coated with a fluoropolymer, look no further than Coating Solutions. Our fast turnaround, high quality, and low minimum lot charge guarantees that when you select us for any coating needs, everyone involved is pleased. The customer receives their part promptly and at a much lower cost. Team up with us for your low friction requirements and you can be sure everyone will be satisfied.
Chemical Resistance of Fluoropolymers
Now while the chemical resistance of fluoropolymers typically benefits those working in the chemical processing industry, it also can help other industries who have found specific uses for it. As with all fluoropolymer coatings, there are still uses that are being discovered for them. Perhaps you have a customer at your machine shop who has been frustrated about a part’s permeability to chemicals. If so, recommend that the part be coated with a fluoropolyer. These coatings are resistant to most known chemicals and can help tremendously with any permeability issues. And if you have a part that needs to be resistant to chemicals, contact us to get it done. We will gladly help you determine which coating will be most advantageous for the substrate.
Unique Electrical Properties of Teflon® and Fluoropolymers
It’s been found that these coatings have unique electrical properties. If your customer has requested that a part be coated for these purposes, Coating Solutions is your first option.
Professional Coaters for Machine Shops in Council Bluffs
Coating Solutions is a family owned and operated company and has been working in the Teflon® and fluoropolymer coating business since 1995. Our expertise allows us to conclude which coat is best for a part’s desired function. You can be certain that we will treat you like family, because we are family.
Back to Iowa Machine Shop Coatings