Benefits Of PTFE-Coated Applications
The main benefit of PTFE coatings (such as Teflon®) is the non-stick properties of the material, which means applications, such as commercial bakeware, have excellent non-stick/release properties and are very easy to clean.
Non-stick and release: PTFE coating applied to a component will give excellent non-stick/release properties and is very easy to clean. This type of coating is also excellent at preventing both hot and cold products from permanently sticking to the substrate and therefore is widely used in the cookware, confectionery, food processing and bakery industries. PTFE coatings are also used for non-stick in the packaging, heat sealing, molding, automotive, aerospace, chemical and pharmaceutical industries.
Non-wetting Coatings:PTFE surfaces are hydrophobic and oleophobic and will not readily wet. This allows the material to self-clean. For the semiconductor industry, this property is vital as it allows all chemical media to run off and be collected.
Temperature resistance Coatings
PTFE coatings can service arduous application conditions involving extremes of temperature. They can remain stable at advanced temperatures of +260°C and for short periods at +290°C. PTFE can be used on extrusion dies and sealing of plastic/elastomers where other treatments may degrade or cause clogging of molten material. These coatings can also perform at cryogenic temperatures and can remain stable at -270°C.
Low friction And Abrasion Resistance Coatings
PTFE coated surfaces reduce friction and can achieve very low coefficients of friction, typically from about 0.04 to 0.15. Where oils and grease evaporate at elevated temperatures PTFE remains and is therefore ideal for shafts, bearing surfaces, moving mechanisms, stud bolts and fasteners. For added abrasion resistance and increased wear life, this type of coating can be reinforced with the addition of fillers and by combining with a metal sprayed base layer.
Corrosion and chemical resistance: PTFE is inherently resistant to attack from most chemicals and when combined with other fluoropolymers such as FEP and PFA greatly enhances the life of the component. PTFE applied as a surface coating will increase the corrosion resistance of the component and can also be enhanced with the use of primers, other pre-treatments such as plating and phosphating. Stud bolts and fasteners, valves, pumps, pipe clamps and connectors all benefit from these types of coatings.
Experienced Coating Application Company In Minnesota
If you have been thinking about having Teflon® or another fluoropolymer coating applied to your parts and equipment, now is a great time! Coating Solutions can turn your job around quickly so that you are not out of production for an extended period. We can also help you choose the perfect coating type for your needs and budget. For more information, call us at (888) 390-8033.